TensorGrip® – EP0-CAL – Low Odor, Low VOC Reefer Repair Adhesive 650 ml Aerosol Can

Description

TENSORGRIP EPO-CA-LOW VOC-LOW ODOR REEFER REPAIR ADHESIVE – 650 ml AEROSOL CAN

TensorGrip® EP0-CAL is a reefer liner repair system eliminates blocking and bracing and reduces cure time to 5 minutes so you can increase your profits and keep your customers coming back! Now you can successfully repair a full refrigerated trailer wall in 45 minutes rather than the standard 24 hours.

Good heat resistance (up to 200°F).
Aggressive: high-strength, permanent bond
Compliant with California VOC laws
80% of final strength achieved immediately.
Full strength achieved in 24 hours.
Fast coverage of large areas

Also available in 22L Canister

DIRECTIONS FOR USE

Aerosol Directions:
• Be sure foam and liner are clean and free of grease, dirt, dust, etc.
• Hold aerosol can 4-6 inches away from foam wall, spray foam wall with two even coats of adhesive covering entire surface.
• Edges of spray pattern should slightly overlap to ensure complete coverage.
• Wait until adhesive is tacky and doesn’t transfer to fingers, but not longer than 20 minutes.
• Position liner onto the foam wall. Be sure liner is aligned correctly. Bonds will be permanent, realignment is not possible.
• Apply sufficient pressure to the liner to ensure strong, permanent bond.
• Ultimate strength is achieved in 24 hours

VOC Content: 35.9%
Solids: 30-36%
Appearance: Color Red
Flammability: Flammable Adhesive; Flammable propellant
Solvent System: Methyl Acetate
Dry Time: 2-4 mins dependent on temp & humidity
Open time: long
Shelf Life: 18 Months