TensorGrip® – EP0-CAL – Low Odor, Low VOC Reefer Repair Adhesive 22Liter Tank

Description

Only ships to business addresses. No PO BOX or Residential

CANNOT BE SHIPPED TO RESIDENTIAL ADDRESS

TensorGrip® – EP0-CAL – Low Odor, Low VOC Reefer Repair Adhesive

TensorGrip® EP0-CAL is a reefer liner repair system eliminates blocking and bracing and reduces cure time to 5 minutes so you can increase your profits and keep your customers coming back! Now you can successfully repair a full refrigerated trailer wall in 45 minutes rather than the standard 24 hours.

Good heat resistance (up to 180°F).
Aggressive: high-strength, permanent bond
Compliant with California VOC laws
80% of final strength achieved immediately
Full strength achieved in 24 hours
Fast coverage of large areas

Available in 22L Canister

DIRECTIONS FOR USE
TensorGrip EPO-CA is designed as a portable, self-contained spray system for refrigerated trailer repair.

Canister Directions:

Be sure foam and liner are clean and free of grease, dirt, dust, etc. • After attaching the gun and hose to the canister, holding spray nozzle 6-10 inches from away, spray wall with an even coat covering entire surface. • Edges of spray pattern should slightly overlap to ensure complete coverage. • Insert fiberglass liner (e.g. Kemlite®) into aluminum scuff and pinch between lip and wall. • With liner laying on floor, spray liner evenly, using the same method of spray as used on the wall. • Wait 5-10 minutes until adhesive is tacky and doesn’t transfer to fingertips. • Using 3-10 people, roll liner up wall – be sure liner is straight & flat against wall. Bond will be permanent, realignment is not possible. • Roll with EP0 Roller beginning in the center and working outward to ensure strong, permanent bond. • Ultimate strength is achieved in 24 hours. • Canister system will spray adequately above 60º F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended. • Notice!!! Do not store at temperatures over 120º F.

VOC Content: 75 g/L
Solids: 30-36%
Appearance: Color Red System
Flammability: Flammable Adhesive; Non-Flammable propellant
Solvent System: Methyl Acetate
Dry Time: 2-4 mins dependent on temp & humidity
Open time: long
Shelf Life: 18 Months

Coverage: Approximately one 22Liter tank will cover 2 trailers but it depends on how much adhesive is applied by the user, a more experience user might get a better yield. It is always recommended to have an extra tank available when repairing a large wall cover section.

Canister Adhesives
Canister adhesives are designed as portable, self-contained spray systems for field or shop applications.  No outside air source is required.  The only equipment needed is a hose and spray gun.

Transfer efficiency of canister adhesives is <90%.
Transfer efficient.