ASI RP 100 Rubber and Plastic Bonding Cyanoacrylate Superglue Kit 1oz bottle, DS18-1.5″ needle and 2oz Accelerator

Description

Kit includes (1) ASI 100 Superglue 1oz bottle, (1) Dispensing needle and (1) 2oz Accelerator bottle.

RP Series, Rubber and Plastic Bonding General purpose instant super glue adhesive ideal for rubber and plastic bonding.

• 100 cps viscosity
• 8 seconds cure speed
• Handling strength in 8 to 12 seconds

RP 100 is a low viscosity, rapid curing, cyanoacrylate adhesive. It is designed to bond a wide range of similar and dissimilar materials.
Handling strength in most applications is in 10 seconds.

PHYSICAL PROPERTIES:
Color: Clear
Viscosity: 100 cps
Specific Gravity: 1.05
Base: Ethyl

PERFORMANCE PROPERTIES:
Substrate         Fixture Time       Bond Strength
Steel                  < 20 Seconds      > 2100 psi
Aluminum       < 15 Seconds       > 1750 psi
Neoprene         < 5 Seconds         > 750 psi
ABS                   < 10 Seconds       > 900 psi
PVC                   < 5 Seconds         > 900 psi
Polycarbonate < 30 Seconds      > 900 psi
Phenolic           < 10 Seconds       > 850 psi
NOTE: Method used, ISO 4587.

Tensile Strength:
Steel:  > 1800 psi
NOTE: Method used, ISO 6922
Mil Spec 46050 C Type II Class 2

ELECTRICAL PROPERTIES:
Dielectric Constant ASTM D 150 Dissipation Factor
1 kHz 2 to 3.50/ < 0.02
Volume Resistivity ASTM D 257: 2 x 1015 to 10 x 1015

ASI QUICK TAC 2 ACCELERATOR™ Acetone Based for Cyanoacrylates 2oz pump spray bottle.

QUICK-TAC 2 ACCELERATOR™ has been developed as a treating agent for use with all Cyanoacrylates. If faster setting speeds are desired, QUICK-TAC™ will aid the curing process and give exceptionally faster set times. When curing beads or in applications where the adhesive is not between two parts, it will allow for fast uniform curing.

QUICK TAC™ 2 will aid the bonding of porous materials such as fabrics or woods. It is useful when bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Ideal for wire tacking, silk screening or in loudspeaker assembly. Using QUICK TAC™ 2 enables the adhesive to fill gaps up to 0.20″. QUICK TAC™ 2 can be applied by brushing or spraying.

PHYSICAL PROPERTIES:
Color: Clear
Viscosity: 3 cps
Base: Acetone
Application: All APS Cyanoacrylates