Tensorgrip® X60 CA Compliant Acoustic Panel Spray Adhesive 22 Liters Kit with Hose and Gun

Description

Kit includes 12″ hose, 23L-B Spray Gun and Tip
Only ships to business addresses. No PO BOX or Residential

CANNOT BE SHIPPED TO RESIDENTIAL ADDRESS

Tensorgrip® X60 CA Compliant Acoustic Panel Spray Adhesive

TensorGrip X60 is endorsed by and developed in conjunction with Autex for all acoustic panel bonding applications. TensorGrip X60 is a low VOC, fast drying contact adhesive compliant with California VOC regulations (SCAQMD Rule 1168). Suitable for all types of acoustic panel installation, including in-house and on-site bonding processes.

• Aggressive – Adheres to nearly any surface
• Fast dry with excellent initial bond
• Excellent high coverage
• High-strength, long-term bond
• Full strength achieved in 24 hours
• Low VOC California compliant (SCAQMD Rule 1168)
• Fast drying with long open time
• Excellent green strength
• Up to 180°F (82°C) temperature resistant

DIRECTIONS FOR USE
TensorGrip X60 is designed as a portable, self-contained spray system for field or shop applications.  Apply adhesive to both surfaces to be mated, at 80% to 100% coverage. Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding. Parts should be mated with as much pressure as practical. Normal coverage required with web spray pattern
is over 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days. Canister system will spray adequately above 60ºF. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended. Notice!!! Do not store at temperatures over 120º F.

VOC Content:   80 g/L  Solids:  32-38% Appearance:  Clear Liquid Solvent System:  Methyl Acetate  Shelf Life:  18 Months

Coverage: 87 ft2/lb

Canister Adhesives
Canister adhesives are designed as portable, self-contained spray systems for field or shop applications.  No outside air source is required.  The only equipment needed is a hose and spray gun.  However, compressed air may be used to improve sprayability and increase dry times.  Typically these are not big issues as canister adhesives are quite fast dry with extended open times allowing for sufficient workability.

Transfer efficiency of canister adhesives is <90%.
Transfer efficient.