Tensorgrip P329 Low VOC Pressure Sensitive Canister Adhesive 22 Liters Kit with Hose and Gun

Description

Kit includes 12″ hose, 23L-B Spray Gun and Tip

TensorGrip P329 is a VERY aggressive pressure sensitive adhesive designed to bond to porous substrates and maintain tackiness.

ADVANTAGES

• Very aggressive
• Long lasting high tack (pressure sensitive)
• Moisture and weather-resistant bond
• Non-chlorinated
• Full strength achieved in 24 hours
• No ODS (ozone depleting substances)

DIRECTIONS FOR USE

• TensorGrip P329 is designed as a portable, self contained spray system for field or shop applications.
• Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
• Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
• Parts should be mated with as much pressure as practical.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
• Canister system will spray adequately above 60º F.

Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
Notice!!! Do not store at temperatures over 120º F.

CANISTER STORAGE/CHANGE OVER

• If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
• To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
• Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.