Tensorgrip® X60AA CA Compliant Acoustic Panel Spray Adhesive

Description

Tensorgrip® X60AA CA Compliant Acoustic Panel Spray Adhesive

TensorGrip X60AA is endorsed by and developed in conjunction with Autex for all acoustic panel bonding applications. TensorGrip X60AA is a low VOC, fast drying contact adhesive compliant with California VOC regulations (SCAQMD Rule 1168). Suitable for all types of acoustic panel installation, including in-house and on-site bonding processes.

Aggressive – Adheres to nearly any surface
Fast dry with excellent initial bond
Excellent high coverage
High-strength, long-term bond
Full strength achieved in 24 hours
Low VOC California compliant (SCAQMD Rule 1168)
Fast drying with long open time
Excellent green strength
Up to 180°F (82°C) temperature resistant

DIRECTIONS FOR USE
Apply adhesive to both surfaces to be mated, at 80% to 100% coverage. Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding. Parts should be mated with as much pressure as practical. Normal coverage required with web spray pattern is over 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days. Canister system will spray adequately above 60ºF. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended. Notice!!! Do not store at temperatures over 120º F.

VOC Content:   80 g/L  Solids:  32-38% Appearance:  Clear Liquid Solvent System:  Methyl Acetate

Spray pattern is adjustable for most every type of need – Low – Medium – High

16 oz. net weight (650 ml. contents)